THE CONCEPT OF GNSS RTK STATION REDEFINED
Start your projects in fractions of seconds The M1 GNSS station is an all-in-one RTK GNSS station. No more cables or external batteries. No need to take many accessories, resulting in easier operation. The simplicity of the setup process improves work efficiency at least 3 times compared to conventional external radio solutions. Beyond a simple GNSS station, the iBase also includes a 4G modem for transmitting GNSS corrections via TCP/IP serve.
LOWER CONSUMPTION, LONGER AUTONOMY, BROADER COVERAGE!
Increased performance with 50% less power consumption The M1 GNSS electronics design significantly reduces power needs without sacrificing the UHF modem's performance. Its two high-capacity removable batteries provide up to 12 hours of continuous operation when transmitting RTK corrections at 5 watts power output. With UHF coverage of up to 8 km in typical survey operations, and up to 5 km in difficult conditions such as wooded and suburban areas
BEST GNSS SIGNAL TRACKING IN ITS CLASS
Full GNSS with 624 channels and advanced multipath mitigation. The state-of-the-art 624-channel GNSS technology leverages GPS, GLONASS, Galileo and BeiDou. The iBase GNSS integrates cutting-edge GNSS antenna technology and multipath mitigation algorithms to ensure that the highest quality GNSS corrections are transmitted to the GNSS rovers
Performance Specification
GNSS Characteristics
• 624 channels with all in view simultaneously tracked
satellite signals
– GPS: L1, L2, L5
– GLONASS: L1, L2
– BDS: B1, B2, B3
– Galileo: E1, E5a, E5b
– QZSS: L1, L2, L5
– SBAS: L1
• Advanced multipath mitigation technology
• Low noise carrier phase measurement
GNSS Accuracies (1)
• Real Time Kinematics (RTK):
– Horizontal: 8 mm + 1 ppm RMS
– Vertical: 15 mm + 1 ppm RMS
– Initialization Time: < 10 s
– Initialization Reliability: > 99.9%
• Post-processing Static:(Static)
– Horizontal: 3 mm + 0.5 ppm RMS
– Vertical: 5 mm + 0.5 ppm RMS
• Post-processing Kinematics(PPK)
– Horizontal: 3 mm + 1 ppm RMS
– Vertical: 5 mm + 1 ppm RMS
• Code Differential
– Horizontal: 0.4m RMS
– Vertical: 0.8m RMS
• Autonomous
– Horizontal: 1m RMS
– Vertical: 1.5m RMS
• Positioning rate: Up to 10Hz
• Time to first fix
– Cold start: < 45 s
– Hot start: < 30 s
– Signal re-acquisition: < 2 s
Hardware
• Size: Ф160.5 mm×103 mm
(Ф 6.32 in x 4.06 in)
• Weight: 1.73 kg with battery (3.81 lb)
• Environment
– Operating: -40°C to +65°C (-40°F to +149°F)
– Storage: -40°C to +85°C (-40°F to +185°F)
• Humidity: 100% condensation
• Dust and Water Proof: IP67
• Shock and Vibration: Survive a 2-meter pole drop
•Tilt sensor: E-Bubble leveling
•Front panel: 2 LED indicates, 0.96” OLED display
Communications
• Network Modem: Integrated 4G modem, LTE(FDD): B1, B2, B3, B4, B5, B7, B8, B20
DC-HSPA+/HSPA+/HSPA/UMTS: B1, B2, B5, B8
EDGE/GPRS/GSM850/900/1800/1900 Mhz
• Bluetooth: BT 4.1
• Wi-Fi: 802.11 b/g/n, access mode
• UHF Radio:
–Protected TNC Female
– Standard Internal Rx/Tx: 450 MHz to 470 MHz
– Transmit power: up to 5W
–Link rate: 9600/bps/19200/bps
–Protocol: CHC, Transparent, TT450
– Range: Typical 5km to 8km
• Data formats:
– CMR input and output
– RTCM2.x, RTCM3.x input and output, NEMA 0183 output
–HCN, HRC RINEX 2.11, 3.02 output
–NTRIP clients, NTRIP caster
• Ports:
–1 x UHF antenna port(TNC female)
–1 x 7-pins LEMO port(external power, RS232)
• Data Storage: 8 GB high speed memory
• Others: NFC
Electrical
• Power Consumption: 12W (depending on receiver configuration)
• Li-ion Battery Capacity: 2 x 7000mAh, 7.4V
• Operating Time (2):
–UHF receiver/transmit(5W): 8h-12h
–Static: up to 15h
Software (Standard)
• Geofix Android field data collection software